			Products
			Our Team
			Quality Control
			Process Control System
			Company Profile
	

Please Install Flash Player
Download from here

Technical Information

Home » Technical Information

CHEMICAL COMPOSITION ( IN PERCENTAGE )

* Thickness of 1.27mm & below will have elongation of 20% min.

Grade	C (Max)	Mn (Max)	P (Max)	S (Max)	Si (Max)	Cr	Ni	Mo	Nitrogen (Max)	Cu/ Others
301	0.15	2.00	0.045	0.030	1.00	16.00 - 18.00	6.00 - 8.00		0.10
304	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00 - 10.50		0.10
304L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00 - 12.00		0.10
310S	0.08	2.00	0.045	0.030	1.50	24.00 - 26.00	19.00 - 22.00
316	0.08	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10
316L	0.030	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10
317	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 14.00	3.00 - 4.00	0.10
317L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 15.00	3.00 - 4.00	0.10
321	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 12.00		0.10	Ti5 ( C + N ) Min or 0.70 max
347	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 13.00			Cb= 10x ( C Min ) or 1.00 Max
409	0.08	1.00	0.040	0.010	1.00	10.50 - 11.75	0.50			Ti= 6x (C+ N ) Min or 0.70 Max
409M	0.03	0.81.2	0.030	0.030	0.40.75	11.00 - 12.00	1.5 max.			Ti= 6x (C) Min or 0.70 Max
410S	0.08	1.00	0.040	0.030	1.00	11.50 - 13.50	0.60
410	0.15	1.00	0.040	0.030	1.00	11.50 - 13.50	0.75
420	0.35	0.50	0.035	0.015	0.50	12.00 - 13.00	0.20.3
430	0.12	1.00	0.040	0.030	1.00	16.00 - 18.00	0.75
JSL AUS	0.08	7.08.0	0.070	0.030	0.75	15.50 - 16.50	4.25 - 4.75			0.9 - 1.10
JS-203	0.08	9.2510.25	0.070	0.030	0.75	14.25 - 15.25	2.25 - 2.75			1.60- 2.0
301M	0.10	4.55.5	0.060	0.030	0.75	14.50 - 15.50	6.0 - 7.0			1.70- 1.90

MECHANICAL COMPOSITION

Grade	Tensile Strength Mpa, (Min)	Yield Strength Mpa, (Min)	%Age Elongation in 50mm gauge length min	Hardness (Max)	Hardness (Max)
				BHN	Rb
301	515	205	40	217	95
304	515	205	40	201	92
304L	485	170	40	201	92
310S	515	205	40	217	95
316	515	205	40	217	95
316L	485	170	40	217	95
317	515	205	35	217	95
317L	515	205	40	217	95
321	515	205	40	217	95
347	515	205	40	201	92
409	380	170	20	179	88
409M	430	275	20	187	90
410S	415	205	22	183	89
410	450	205	20	217	89
420	700( max )		15	217	95
430	450	205	22	183	89
JSL AUS	515	205	40	217	95
JS- 203	515	205	40	217	95
301M	515	205	40	217	95

Technical Information

Sitemap

Products

						Butt Weld Fittings
			    	
						Industrial Flanges
			    	
						Industrial Valves
			    	
DIN Globe Valve
Mounted Ball Valve
Gate Valve
Swing Check Valve

						Thread Sockets
			    	
						Stainless Steel Flange
			    	
						Stainless Steel Sheet
			    	
						Steel Beams
			    	
						Industrial Fastener
			    	
						Industrial Pipe Fitting
			    	
						Stainless Steel Bar
			    	
						Stainless Steel Pipe
			    	
						Stainless Steel Strip
			    	
						Welding Rods

Select Language: